A handmade vase made from threads is an easy-to-make and elegant souvenir. It can be made in two ways - on a balloon or using a solid frame. Even a child can master the process of creativity. The principle is based on the fact that the threads are wetted with glue, which then hardens. The structure hardens into the shape you gave it.
What you need
For the manufacture of the product you will need:
- Threads - knitting, floss, twine or even sewing. The thinner they are, the longer it will take to wrap the structure.
- Balloon. It's better to have several at once - suddenly something goes wrong.
- A plastic or glass container (if using a solid frame) on which the thread will be glued. The base must be wrapped with cling film.
- Stationery glue or potato starch paste. For strength, you can add a little PVA to it.
- Decor that depends only on your creative imagination. Lace trim, bows, flowers look cute and touching.
To attach decorative elements, it is convenient to use a glue gun with silicone.
Step-by-step instruction
The process of creating a vase is as follows:
- The first step is to inflate the balloons. You can create quite large vases - the glued thread will keep the shape well. Naturally, the more the product is needed, the more the balloon inflates.
- From a tube of glue, you need to build a structure through which the thread will pass, wetting with the composition. It will be convenient for someone to soak the whole skein in the mixture or come up with another way. It is important that the threads are fixed on the ball, and their entire mass is well saturated with glue.
- After careful winding, the structure is sent to dry. It is better to do this in the sun, but you can use a battery or a hairdryer.
- After all the threads have dried and the workpiece has hardened, you can remove the ball. First, the tail is cut off. Then the ball is pierced with a needle. You will hear how it hisses and crackles, gradually deflating and separating from the walls of the thread frame.
- You can get the ball after the hole is cut. The frame cuts very well. You can give the vase any look - a shallow bowl, a spherical vase, a basket, a house with a window. From one oval blank, two products are obtained if the frame is cut in half.
- After the hole is made and the ball is removed, it's time to decorate. You can decorate the surface of the vase with flowers, lace, fix butterflies or ladybugs on it.
Sometimes needlewomen are faced with a problem when a large number of small balls of thread or yarn remain, from which it is no longer possible to make something worthwhile.
They often put all these hanks in a basket or bag, leaving them for a period when they still figure out what to do with these little balls.
We confidently declare: after reading our article, you will no longer have to puzzle over this question, because we will provide you with some interesting ideas for using threads and yarn to decorate the interior of your own home with crafts made from woolen knitting threads and ordinary thin yarn.
This hobby was invented a long time ago and quickly spread around the world due to its practicality, because it is impossible to calculate a skein of thread so as to use it up to a centimeter. In addition, in ancient times, threads were the only way to make and give a doll to a child.
Now there is no such problem. The modern market offers a bunch of toys that can impress your baby with their originality and uniqueness, but can at least one of them be compared with the one that is made by yourself, and into which you have invested a piece of your soul and boundless maternal love.
Well, if you make this masterpiece of needlework together with your baby, then the process of making crafts from threads with your own hands will forever remain in his memory as one of the warmest moments in life.
From threads, you can make not only crafts from threads for children in the form of various dolls, cute figurines of animals, but also paintings, vases or decorations for lamps.
Consider a few master classes that will make you a real master in this area.
Pictures from yarn
If you do not know how to use many small pieces of thread, which are no longer enough for pompoms and kits, then make a picture out of them. To do this, you do not need a large amount of materials. All you need is scissors, cardboard and glue, and don't forget about the threads themselves.
Follow the algorithm of our lesson, and you will get an excellent result:
- On cardboard, circle the outlines of the pattern that will be created with threads. If you printed the finished picture, then stick it on top of the cardboard.
- Now you have a long job ahead of you. It is necessary to cut all the threads into small, small pieces. Entrust this task to your child or do it together with him. So you cheer him up and at the same time make him work a little. All pieces must be sorted by color.
- Now start creating the picture. To do this, step by step, lay out threads of the same color on a heavily glued area of \u200b\u200bthe pattern.
- So it is necessary to continue until there is not a single empty space left in the picture.
- Let the masterpiece dry and you can safely hang it on the wall!
Yarn flowers
If you still have floss or iris threads, then with the help of them you can create crafts from a ball or paper and threads in the form of flowers of incredible beauty.
To do this, you only need threads, glue, a piece of newspaper, which we will use as a blank, scissors and wire.
If you want to make flowers some original, grab some ribbons and beads. Let's start our master class of crafts from threads.
Manufacturing instructions
- Create flower blanks. This is quite simple to do: you just need to crumple a large piece of paper or newspaper and make a ball out of it.
- On this homemade ball we will wind a thread soaked in glue. We decided to create a composition of delicate white bells, so we need a skein of white threads or floss threads with blue and white inserts. This combination will look very interesting and gentle.
- After the ball reaches a sufficiently large size and there are no gaps and “bald” areas on it, it is worth letting it dry.
- After a few hours, you can return to work on your craft. Now you need to carefully cut off the excess from the ball, giving it the shape of a flower, in our case, a bell.
- Carefully thread the wire into these buds and fasten each bell on it, decorating the place of fastening with beads.
- To hide our wire stalk, we again impregnate the thread with glue, this time we take a green thread, and wind it around the wire.
Below you can see photos of thread crafts. We hope that, inspired by one of them, you will be able to create your own masterpiece.
Photo crafts from threads
Note!
Note!
To freshen up a familiar interior or decorate a house for the holidays, it is not necessary to make expensive purchases. Gossamer balls always look impressive as pendants, craft items, Christmas toys, vases and even chandeliers. Let's consider a simple way how you can make a ball out of thread and glue with your own hands.
The essence of making a gossamer craft lies in the technique of wrapping a ball shape with threads impregnated with an adhesive composition. The glue dries, the base is removed - the decoration is ready. Then the ball can be cut or decorated, combined into groups to create a composition, etc.
A few secrets to successfully making gossamer balls
In order to make a ball of thread, first of all, you need to choose the right materials: yarn, glue, shape, glue container, brush, and prepare the workplace.
There are a few simple rules to keep in mind:
- The thinner the threads (for example, sewing), the faster and more likely the finished product is deformed. To avoid this, they should only be used for small balls (less than 8 cm in diameter). For larger crafts, thicker threads (mulina, yarn, twine, etc.) are needed, as they hold their shape better.
- Nevertheless, if you have to make a three-dimensional decoration from thin threads, you should apply them quite tightly and, in addition to glue, fix them additionally (for example, with hairspray or transparent construction varnish).
- To make a gossamer ball, you need liquid glue. Suitable silicate and PVA. (sold in tubes) is more liquid, building (in cans) is thicker and therefore “holds stronger”. Secondary glue, like hot glue, is not good at all.
- Dip the threads before serving on the form should be entirely. This can be done in two ways. In the first case, the thread will be dipped into the glue poured into an open container. In the second - go through the jar of glue, through the opposite holes at its bottom. The "correct" holes in the tube are slightly larger than the thickness of the thread (it is well wetted with glue), but the contents of the container do not flow onto the desktop.
- No need to insert candles inside crafts or install in a room with high humidity. In the first case, the ball can easily catch fire, in the second case, it can lose its shape and “go soft”. In order not to abandon the idea of installing lighting inside the ball, we advise you to choose LED bulbs based on batteries.
Detailed instructions for making balls of thread
Consider the whole process step by step. It is simple, and it can take only 15-20 minutes to get the first blank.
Step 1. Let's choose a base. To do this, they most often use balloons of different diameters or fingertips (sold in pharmacies) - for small crafts. They are good because at the end of the work they are easy to take out: pierce them and, after the air has escaped, get them through the gap without damaging the shape of the threads.
Harder bases: rubber balls and foam balls (used most often for topiary), are perfectly rounded than inflatable forms. But at the same time, they are more difficult to extract at the final stage.
Step 2 Let's prepare the form. The base, which will be tied with threads, should easily lag behind the adhesive layer of the product after drying. To do this, the entire form should be coated with petroleum jelly or oil (from a pharmacy), or liquid silicone (inexpensive, in small jars or in the form of a spray, which is much more expensive, can be purchased at sports equipment stores or auto cosmetics). It is better to remove excess lubricant with a napkin so that the yarn does not slip off the surface during operation.
Step 3 We wrap the base. Threads well moistened in glue are placed randomly on the ball. It is advisable to do this so that the threads do not intersect in one place more than 2 times. You should not stretch the winding too much (especially on an inflatable base), but nothing should sag either. In places where there is not enough glue, you need to additionally apply it with a brush.
Step 4 Drying. At this stage of work, you need to let the whole craft dry. To do this, it is desirable to hang it in a dry and warm place so that it does not touch any surface (it will not stick). Depending on the size, thickness of the winding and humidity, the product can dry up to two days. To get the finished result much faster, it is permissible to use a hair dryer.
Step 5 We take out the base. After the ball is completely dry, you need to remove it from its original shape. If it is a balloon, then it is usually pierced and taken out through any suitable hole.
Step 6 We decorate. Any fairly light materials are suitable for decorating gossamer balls. These can be applications or inscriptions made of paper, beads, rhinestones, sequins, ribbons, etc. Balls collected in a group look spectacular. For example, for a New Year's wreath or garland.
The filling in balls will look beautiful: large beads, tinsel, serpentine, foil, confetti, etc. If necessary, the product can be painted. Aerosol paints are best for changing colors. With their help, it is easy to get shiny or matte gold and silver balls.
Advice! Hot glue is best for attaching jewelry: it is transparent, quickly hardens and gives a very strong connection.
Some interesting options for crafts from spider webs
A fairly dense ball of thread and glue can be used for topiary or other types of crafts. The main thing is that the fragile base can withstand additional decorative elements. Consider the technique of performing some of them.
Snowman
You will need:
- three different-sized balls of white (or blue) yarn,
- eye buttons,
- orange paper nose cone
- branches for hands
- round pieces of cotton for legs,
To assemble a pyramid of balls - a blank for a future toy - you need to lightly press on a larger ball from both sides to make neat dents. Glue a medium-sized ball to one of them, and place the other on the work surface. The third part (head) is also attached.
All remaining parts are glued to the finished base. At the end, you can tie a bright yarn scarf.
Advice! To make even dents on the ball, lightly moisten this place with a wet brush.
Topiary - "tree of happiness"
For its manufacture you need:
- one ball ("crown" of the tree),
- a small pot with filler (pebbles, coffee beans, beads, etc.) to “plant” our “plant”,
- wooden or wire stick for the "trunk",
- glue,
- ornaments ("leaves" and "flowers").
Making a topiary is not so difficult: just assemble the frame (attach the ball to the stick), place the “trunk” in the pot, fill it with filler and decorate.
Most often, crepe paper flowers, satin ribbon bows, coffee beans, beads, strips of quilling paper and much more are used for the “crown”. All this is attached to hot glue with a gun.
Flowers
Making them is very easy. All that is needed is to cut the petals around the diameter of the ball with cloves. From one ball, 2 identical blanks are obtained. Flowers can be decorated with beads, beads, "stamens" made of wire, etc.
Birds, animals
Since these crafts are very simple, they are great for competitions in kindergarten or for decorating a Christmas tree. For their manufacture, paper blanks of “wings”, “paws”, “tails”, “tufts”, etc. are needed, which are glued to the “trunk” - a ball of thread.
Vase or bowl
To get a vase or a deep plate from a gossamer ball, you need to carefully cut it in half. For the bottom, you need to slightly moisten the bottom and press it inward. When the product dries again, it will retain the desired shape.
To make the hemisphere of threads stronger, it is recommended to coat it on both sides with a colorless varnish. True, it will be possible to use such an item only for decorative purposes: it will not withstand moisture and a significant load. But at the same time it will become a highlight of any interior.
The apartment will look much more comfortable if you add a few handmade decorations to the interior.
Things created by one's own hands accumulate the energy of the person who made them, and look much more attractive than items produced in a million copies. Making will not take much time, but the result is worth it. Such a product will perfectly fit into the interior and will arouse the interest of guests.
We offer to make your own a vase of yarn and PVA glue.
List necessary materials :
- Balloon;
- yarn;
- glue;
- gloves;
- vase decorations.
List necessary tools :
- needle and thread;
- scissors;
- a piece of chalk.
How to make a vase of thread and glue with your own hands
1. We inflate the ball. The size of the future vase will depend on him.
2. We take the yarn and begin to tie the ball with it. We wind the threads, as in a ball, as much as you think is necessary.
If athreadwill befew, thenproductwill beunstable.
3. After winding the threads, the ends must be fixed.
4. We put on rubber gloves so that the glue does not get on the skin of the hands.
5. Pour the glue on the ball and smear it over the entire surface. Necessary generously lubricate the entire product, so that there are no gaps.
tasselfulfillsuchworkmuchlonger.
6. We send the workpiece to dry. In order for the ball to dry completely, you need 2 to 3 days. After the glue dries, the threads will become solid.
7. After the adhesive has completely dried, it is necessary to burst the ball. Pierce it in several places and carefully remove from the workpiece.
8. Using chalk or a marker, mark the hole in the vase and carefully cut it out. Now the product is more like a vase .
9. Can be used as decoration satin ribbons, beads, flowers and more.
In such a vase you can store sweets and fruits. The product is an excellent option for a gift to a friend or mother.
Vase of threads and glue in the interior. Interesting models
We also offer master class of the original heart-shaped vase. It is especially relevant on the eve of Valentine's Day. In such a vase you can store sweets, tea bags, cute trinkets. Children will also be delighted with the vase. This craft will help express your feelings for a loved one.
List necessary materials :
- thick cardboard;
- glue "second";
- toothpicks;
- yarn;
- ribbon beads and rhinestones for decoration.
- First you need to make the bottom. To do this, you need to cut a piece of cardboard in the shape of a heart. You can print the finished template if you doubt that you can draw an even heart.
- We cut off each toothpick on both sides so that they do not have sharp tips.
- Toothpicks are glued along the edge of the heart. In order for the vase to be stable, it is necessary retreat from the edge 1 cm.
- We braid toothpicks with threads. Can be used as decoration beads and sew-on rhinestones, weaving them into the campaign of work.
- We decorate a vase rhinestones, ribbons, beads. Feel free to be imaginative and then you will definitely get a beautiful vase. This interior decoration will delight your family and friends.
- In the middle of the vase, you can put an embroidered napkin or just a beautiful piece of fabric. For a vase, you can also make a lid, and then you get a box for jewelry and various little things.
Enjoy your creativity!
DIY home decor is always beautiful, cozy and quite budget. Do you know that threads can not only sew or knit? It turns out that you can make original crafts for the home from them. , which do not require special decoration skills and high costs.If you have a few balls of multi-colored thread lying around for a long time, use these inspiring ideas.
1. Balloons from threads and balloons
Light and balloons made of threads can decorate any interior. Making them is quite simple: you need to wind the threads smeared with glue around the balloon, then dry the threads, pierce the balloon and carefully remove it. To quickly learn how to make such stylish interior balls, watch the step-by-step video tutorial.
2. Panel of threads and nails
Another interesting idea is an elegant panel of threads stretched over small nails. Watch step-by-step photos or videos with a master class, and you can make such a panel yourself from the most available materials.
3. Pompom decor
Thread pompoms are very easy to make and can be used to make fun and cozy decor items. Look at these photos - you will surely want to bring some soft and fluffy pom-poms to your interior...
4. Bottle vases
With the help of threads, you can also create original vases. To do this, you will need a glass bottle (or jar), colored threads and PVA glue. Apply glue to the surface of the bottle, and then as tight as possible wind the yarn around the bottle so that there are no gaps between the threads.Simple and beautiful!
5. Thread letters
To make bright interior letters from threads, you will need thick cardboard, scissors and threads of different shades. These letters m You can also decorate with decorative beads, buttons or flowers. colorfulletters in the house you can decorate a chest of drawers, a window sill, a shelf or a sofa.
6. Thread wall decor
With the help of threads, you can also make elegant wall decor. In terms of form and execution - there is scope for creativity and imagination! For example, it is a good idea to wind multi-colored threads on a regular embroidery hoop.
Or tie multi-colored threads of various lengths to a copper tube. See how easy it is to make such an accessory with your own hands - it turns out very stylish!
7. Braided thread mandala
Mandala is a sacred geometric symbol used in meditation in Buddhism, which looks great in the interior as a decoration.
